The Inventory Master Active 433 MHZ RFID Badge Tag

The Active 433MHz RFID Badge Tag is a battery-powered RF transmitter.

SKU: 124053tek Category:

Overview

The badge tag can form part of an access control system for controlled areas

The Active 433MHz RFID Badge Tag is a battery-powered RF transmitter that can be clipped onto an article of clothing or worn around the neck with a lanyard. Every tag broadcasts its factory pre-programmed unique ID and a status message at a periodic rate.

This Badge Tags are specifically designed for tracking personnel and their interaction with tagged assets. Alternately, when used with an RFID Reader portal antenna system, the badge tag can form part of an access control system for controlled areas.

These active RIFD tags are programmed to operate at a 2-second beacon rate. Tag cases are impact resistant, splash resistant and temperature stable. Read ranges up to 1,000 feet can be obtained with optional antenna configurations. The standard tag operates with a very low duty cycle for a long battery life of greater than 3 years (typical)  at a 2-second beacon rate.

Features

  • Encoded Radio Transmissions at 433 MHz
  • Designed for Tracking Personnel
  • Clip to Clothing or Hang from a Lanyard
  • 2 Second Beacon Rate
  • Low Power Consumption for Long Battery Life
  • Superior Anti-Collision Technology for High Tag Densities

Technical Specifications

Operation
Operating Frequency433.92 MHz
Group Code & Tag ID Codes> 1trillion unique IDs
Typical Transmission Range> 300 ft.
Radiated Emissions71.8 dBuV/m (maximum)
ModulationASK
StabilitySaw Stabilized
Enclosure
Width2.15 in (54.6 mm)
Depth3.40 in (86.36 mm)
Height0.22 in (5.58 mm)
Case Weight0.9 oz (25.5 g)
ConstructionInjection-molded polycarbonate enclosure
DurabilityTough, impact resistant and temperature stable
Environmental
Operating Temperature:-20 °C to 70 °C
Storage Temperature:-40 °C to 80°C
SealingSplash resistant
Power
Battery TypeLithium CR2032 coin cell
Smart Tag FeatureLow battery indication
Battery Life> 3 years (measured at 2 second beacon interval)

Reviews

There are no reviews yet.

Be the first to review “The Inventory Master Active 433 MHZ RFID Badge Tag”

Your email address will not be published. Required fields are marked *